Summarize
This series is mainly applicable for the location by collimating line marking of the electric tools involving electric annular saw, miter saw, jig saw, table annular saw, steel cutter, marble cutter, tile saw, the location of pistol drill and bench drill, and the labelling of level gauge in the decoration of industrial constructions, besides, the laser products for recreational billiard, the aiming and location of hunting rifle, the indication of devices and equipment and so on. This series is the first family has tested and confirmed by USA unit, has firstly obtained the certification of TUV(TUV Rheinland Group), EMC and CE, and also obtained safety standard certificate for Laser I & II, and has been checked and filed by FDA(USA).
Note: LDBXQ03B Certificate Model No. of Class Ⅱ; LDBXQ03 Certificate Model No. of Class Ⅲ A.
|
Description |
|||
|
Laser that can generate straight lines, two parallel lines, cross lines, and circular dots |
|||
|
Specifications |
|||
|
Model |
LDG02 |
||
|
Standard |
|
||
|
Data type |
Minimum value |
Typical value |
Maximum value |
|
Luminous power(mW) |
2.0 |
- |
4.5 |
|
Work voltage(V) |
2.6 |
3.0 |
3.3 |
|
Work current(mA) |
- |
- |
200 |
|
Wavelength(nm) |
522 |
532 |
542 |
|
Operating temperature(℃) |
0 |
- |
+40 |
|
Preheat for 30s when used below 10℃ |
|||
|
Storage temperature(℃) |
0 |
- |
+50 |
|
Power stability |
- |
<5% |
- |
|
Divergence angle(°) |
160 |
170 |
178 |
|
Line width at 6m(mm) |
2.0 |
2.5 |
3.5 |
